You would like to assemble the bearings or slide bearings


You would like to assemble the bearings or slide bearings


This replacement is necessary as part of normal wearing period or a problem arising from inadequate water treatment.


Please find the procedure to replace the bearings below:
All operations to be performed are clearly photographed in the attached file.

Click here

1 - Remove the black caps from the cranks using a flat screwdriver.
2 - Unscrew the screws with a 13 pipe wrench
3 - Remove the cranks using a hub wrench
4 - Unscrew the 3 screws of the two stainless steel collar
5 - Remove the clips with a circlips pliers
6 - Remove the bearings from the plastic cage
7 - Proceed with reverse manipulations to reassemble the whole.

In case your product is out of warranty (more than 3 years), please submit your request on our customer interface (available here)
If your product is still under warranty (less than 3 years), fill out the form (available here), with your purchase invoice and a photo of the problem attached.

Relevant products

  • Aquabike WaterRider 4S
  • Elliptique Waterflex Elly
  • Aquabike Waterflex WR3
  • Aquabike Waterflex WR4
  • Aquabike Waterflex WR5
  • Aquabike Waterflex Happy Bike
  • Aquabike Falcon
  • Aquabike Waterflex Inobike 6
  • Aquabike Waterflex Inobike 7
  • Aquabike Waterflex Inobike 8
  • Aquabike aluminium Lanabike